Quickscreen slat system is an extremely cost effective. Each slat is screwed off once in position. The system allows for variable slat spacing so any gap is achievable. Once slats are screwed off, a snap on cover hides the fixings to provide a seamless finish.
Assemble on-site with pre-powder coated material – quick and easy!
Variable spacing to suit your project needs!
Suits horizontal slat screening, the side frame is screwed directly to a post or wall without need of another U channel or angle.
In ‘void’ situations where slats cannot be fed in from top down, an F section is available. The F section can also be used where it is preferred to pre-make complete panels in a factory & simply install onsite.
For raking panels or angles, slats can be cut at an angle and screwed off making Quickscreen an ideal solution for difficult installations.
Vertical slat screens can also be achieved with the Quickscreen slat system.
Side frame suits 65mm x 16.5mm or 90mm x 16.5mm slats
For privacy/nil spacing, simply stack slats on top of each other
Our range of genuine Interpon D1000 series powder coat finishes has been carefully selected to include the most sought after colours on offer.
All components are suitably pre-treated prior to powder coating and are applied by fully accredited coating facilities. Also available in our Alumawood timber imaged finishes.
Custom colours are also available for project orders, contact us for more info
Slats have commonly been made from harvested timber which must be repeatedly painted. Alumawood slats are made from aluminium – the most abundant metal in the Earth’s crust and third most abundant element (after oxygen and silicon). There is no ongoing painting issues with imaged slats.
Aluminium is described as non-combustible. When aluminium is exposed to a prolonged fire environment it will begin to melt (not burn) with a melting point between 600 and 660 degrees celsius. Aluminium louvres are an excellent choice where fire risk requires consideration.
Imaged aluminium is impervious to insects and termites plus the non-porous surface is naturally resistant to fungi, mould and mildew. It is also unaffected by exposure to sunlight and water making it ideal for batten/screening.
Aluminium weighs approximately one third of a piece of steel that is the same size and shape. Pronto Louvres are made by extruding aluminium which allows for optimisation of shape to maximise strength and reduce weight.
Alumawood features genuine Interpon base coat with Italian film for a long lasting finish.
Woodgrain effect imaged aluminium has a durable base coat applied followed by a technically advanced film which is transferred onto the base coat under heat & pressure. The transfer cannot rub or peel off. The sophisticated process is called sublimation.
Aluminium does not rust. Alumawood may be enjoyed for the long term with minimal maintenance and no worry of rusting.
Aluminium is produced to chemical composition, mechanical property and dimensional tolerances in AS/NZS 1866: 1997.
