A complete system consisting of slats, side frames, caps, posts, pedestrian gates and sliding gates in Western Red Cedar or Kwila finishes.
Make the transition from timber to our Italian imaged non-weld patented system. Maintenance fee & easy to install.
1. Build as you go: Affix side frames to post or wall and install slats working from the bottom to the top. No U channel or F section required.
2. Pre-assemble: Assemble panel in workshop or onsite. Install assembled panel using U channel or F section.
Achieve any slat spacing desired. Once slats are screwed off, a snap on cover hides the fixings to provide a seamless finish.
A complete system consisting of slats, side frames, caps, posts, pedestrian gates and sliding gates. Highest quality product at the best trade prices.
Each slat is screwed off once in position. The system allows for variable slat spacing so any gap is achievable. Once slats are screwed off, a snap on cover hides the fixings to provide a seamless finish.
Industry leading trade quality system. Extruded with Interpon undercoat and finished with an Italian timber imaged.
Choose from our range of 65mm x 16.5mm slats with centre webbing or 90mm x 16.5mm slats in stock to suit side frames.
Slats have commonly been made from harvested timber which must be repeatedly painted. Alumawood slats are made from aluminium – the most abundant metal in the Earth’s crust and third most abundant element (after oxygen and silicon). There is no ongoing painting issues with imaged slats.
Aluminium is described as non-combustible. When aluminium is exposed to a prolonged fire environment it will begin to melt (not burn) with a melting point between 600 and 660 degrees celsius. Aluminium louvres are an excellent choice where fire risk requires consideration.
Imaged aluminium is impervious to insects and termites plus the non-porous surface is naturally resistant to fungi, mould and mildew. It is also unaffected by exposure to sunlight and water making it ideal for batten/screening.
Aluminium weighs approximately one third of a piece of steel that is the same size and shape. Pronto Louvres are made by extruding aluminium which allows for optimisation of shape to maximise strength and reduce weight.
Alumawood features genuine Interpon base coat with Italian film for a long lasting finish.
Woodgrain effect imaged aluminium has a durable base coat applied followed by a technically advanced film which is transferred onto the base coat under heat & pressure. The transfer cannot rub or peel off. The sophisticated process is called sublimation.
Aluminium does not rust. Alumawood may be enjoyed for the long term with minimal maintenance and no worry of rusting.
Aluminium is produced to chemical composition, mechanical property and dimensional tolerances in AS/NZS 1866: 1997.
Get it all to match. With our various options for pedestrian and sliding gates.
